i'coo pico 7, Инструкция по эксплуатации

Страница: 18 / 46

6
softcarrier cosycoon
(sold separately)
• Remove the bumper bar by simultaneously pushing
the buttons on the inside of the armrests and sliding
the bumper bar upwards.
NOTE: never use the bumper bar to lift the stroller.
• Lift the legrest to horizontal position (20a)
• Lower the back of the seat to maximum with the
backrestadjustment on the back of the seat. (20b)
• Bring the back of the seat into softcarrier position
by repositioning the snap on both sides of the seat.
(2)
• Replace the hood in reversed position on the plastic
part on the frame and close the clip around the
tube on both sides. (22)
• Place the softcarrier inside the stroller (23a) and
connect the clips of the softcarrier to the D-rings
in the seat. (23b)
accessories
In addition to the e-care car seat the following
accessories are available: foot muff, back pack (for
diapers), rain cover, the e-care adapter set, and a travel
bag for the stroller.
maintenance
• To prolong the life span of your stroller, dry with a
soft cloth after use in rainy weather.
• Clean the wheels and the metal parts regularly to
keep the stroller functioning smoothly.
• Use mild detergents and lukewarm water for
cleaning.
• Do not use aggressive solvents.
• The seat and the shopping basket should not be
washed in the washing machine.
• For safety reasons use original i’coo parts only.
Maintenance of wheels:
• The metal parts must be cleaned regularly. Regular
treatment with a silicon spray prevents corrosion /
deposit.
NOTE: The chance of corrosion is especially prevalent
with use at the beach. Riding through seawater is
not recommended. Thoroughly clean the wheels
after a trip to the beach. This also applies for use
under wintry conditions in which salting of roads
may have the same results.