i'coo pico 7, Инструкция по эксплуатации

Страница: 16 / 46

4
parts (8b) and then fasten the snaps
• Attach the 2 side straps (8c) around the basket
tube (behind the rear legs).
• Attach the small strap under the seat to the thin
black tube (8d).
• Attach the lower elastic strap (8e) around the leg
rest.
Adjustments:
• The backrest can be lowered/raised with the strap
at the back of the backrest (9). The backrest can
be placed in the desired position by pressing the
plastic part and changing the length of the strap.
• To adjust the leg rest, simultaneously push the
buttons on both sides of the leg rest hinge and
rotate the leg rest to the desired position.
NOTE: Never allow the child to sit or stand on the
leg rest or backrest. SAFETYHARNESS
safetyharness
Apply the parking brake before carefully placing the
child in the stroller.
• Fasten the lap and shoulder belts to the crotch
strap (0a).
• Adjust the belts to suit the size of your child with
the buckle (0b).
• Push the buttons to unbuckle (0c).
• Check regularly to make sure your child is safe.
• D-rings are provided to fit an additional harness.
Ensure that it conforms to BS 6684 regulations.
bumper bar
• Attach the bumper bar by sliding the ends of the
bumper bar over the grips of the seat until you hear
a click on both sides ().
• To adjust the height of the bumper bar, push the
buttons on the sides of the bumper bar and turn it
into the desired position.
• The bumper bar can be removed by simultaneously
pushing the buttons on the inside of the armrests
and sliding the bumper bar upwards.
NOTE: never use the bumper bar to lift the stroller.
hood
• Click the hood onto the plastic connection part
above the rearleg connection (3).
• Close the clip around the tube.
• To open the hood, push the front of the hood