Iconix ICL-R, Руководство пользователя

Страница: 5 / 68

IC L ive Users Manual - Models ICL-R & IC215S-R
5
Common Setups
ICL-R digitally steered line arrays and IC215S-R subwoofers
were designed to work together, both acoustically and mechani-
cally with the subwoofer supplying both the extra bass impact
needed by most musical productions and a solid mounting base
for the tall slender columns. Together, the two building blocks
form 6 useful configurations.
The unique interlocking hardware system with Quik-Release pins
joins the line array and the subwoofer together into a rigid as-
sembly, allowing the subwoofers to be used as mounting bases
for the columns. When used as a mounting base, the sub-
woofers also raise the line array above the floor.
ICL-R arrays perform best when their acoustic center, the point
of origination for the narrow acoustic beam, is several feet above
the ear level of the audience. If it’s placed lower, too much of the
sonic beam is absorbed by the first row of the audience and
never reaches those in the rear. If it’s placed much higher, the
narrow vertical beam tends to” light up” the center of the audi-
ence and drop off in both the front and rear.
This puts the ideal height for the bottom of an ICL-R array at
roughly four feet above the floor for a seated audience.
An IC215S-R standing on end is 4’ tall making the combination
of an ICL-R array mounted on top of a standing IC215S-R sub-
woofer an ideal arrangement for many setups.
An IC215S-R subwoofer laid on its side and a single ICL-R array
work well when space is available for them on the stage. Mount-
ing two stacked arrays on a single subwoofer is not recom-
mended, as the assembly is unstable.
Dual subwoofer assemblies combined with either a single ICL-R
array or with two stacked ICL-R arrays are two other popular
configurations.The dual subwoofers provide the desired mount-
ing height for the array(s) and enough bass for even the most
demanding musical events.
Stacked ICL-R arrays provide tighter beam control than a single
ICL-R and a much higher output level. They are especially desir-
able in reverberant rooms where tight control of the beam is
needed to deliver clear speech over a considerable distance.
When only speech is involved and the bass support provided by
the subwoofers is not needed, single or stacked ICL-R arrays
are an ideal solution. They can be attached to the truss work
with Chesebrough clamps or by removing the array’s rear
pole/handle and using the pole clamps to secure the array to the
truss.
ICL-R arrays are also equipped with AeroQuip Fly-Track, so they
can also be easily flown from the truss with industry standard
AeroQuip hardware.