7. Battery Information and Specifications
This section is intended to provide you basic information about your battery and charger. Please read this section carefully to ensure you. For user safety and to
prolong the life of your battery, as well as improve battery performance, please follow these instructions.
Battery Power
Battery Specifications
When the Battery Indicator shows low battery capacity, please charge your battery 5-6 hours utilizing the charger that you
received in your Kick Scooter CITY package. To fully recharge your battery please follow the instructions under Charging
your Kick Scooter CITY.
BATTERY WARNING
Failure to follow the Safety Precautions listed in the Battery Warning could lead to serious bodily injury and death.
Seek immediate medical attention if you are exposed to any substance that is emitted from the battery.
• Do not attempt to modify, change, or replace your battery.
•
Do not use your Kick Scooter CITY if the battery begins to emit odor, overheats, or begins to leak.
• Do not touch any leaking materials, or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances, do not open the battery, or insert anything into the battery.
• Please only use the charger provided by Kick Scooter CITY.
•
Do not attempt to charge the Kick Scooter CITY if the battery has discharged or emitted any substances. In that case, the battery should be abandoned for safety.
• Please follow all local, state and federal laws in regards to recycling, handling and disposing of Lithium Ion batteries.
• The scooter should only be shipped in its original packaging.
• Do not throw away your box as you need youк scooter packaging for future use.
Battery
Charging time
Voltage
Initial Capacity
Working Temperature
Charging Temperature
Storage Time
Storage Temperature
Storage Humidity
Lithium Battery
5-6h
36V
7.5Ah
0° ~ +50°
0° ~ +35°
12 months
0° ~ +25°
5% - 95%
8. Charging your scooter
Step 1:
Ensure that the charging port is clean and dry.
Step 2:
Plug the charger into the wall, then connect the cable with the power supply
(100 ~ 240V; 50-60Hz), make sure the light on the charger is lit GREEN.
Step 3:
Connect the charging cable into the charging port of the Kick Scooter CITY.
The indicator light on the charger should change to RED, indicating that
your Kick Scooter CITY is now being charged. When the RED indicator light
on your charger turns to GREEN, then your Kick Scooter CITY is fully charged.
A full charge typically occurs within 5-6 hours.
Step 4:
Please unplug the charger from your Kick Scooter CITY and from the power outlet.
IMPORTANT NOTES ABOUT CHARGING
•
If the GREEN light on your charger does not turn RED when you plug it into your kick
e-scooter, it could mean you have to check the cables to ensure you have a
proper connection; or that your Kick Scooter CITY is already fully charged.
• Do not overcharge, as this will affect the life of the battery.
•
The best charging temperatures are between 0
°
~ +35
°
. Extreme cold and extreme heat
will prevent your battery from charging fully.
•
Make sure to unplug your charger before standing on or operating your kick
e-scooter, as this can be very dangerous.
•
Use only the Kick Scooter CITY charger that you received in your box.
•
If the Kick Scooter CITY is powered on when you enter the plug, the Battery
Indicator will
begin blinking, if the Kick Scooter CITY is powered off when
you
enter the plug, the Battery Indicator will not blink.
NOTE
Only the indicator light on the charger will tell you the status of the battery
during charging.
9. Inspection, Maintenance, and Storage
Your Kick Scooter CITY requires routine inspection and maintenance. This
chapter describes maintenance steps and important operating tips. Before you
perform the following operations, ensure the power and charging cable is
disconnected.
Inspecting and Cleaning your Kick Scooter CITY
Disconnect the charger and turn off your Kick Scooter CITY.
Routinely check the body of the Kick Scooter CITY and tires for damage or
excessive wear.
Avoid using water or other liquids and cleaners on the Kick Scooter CITY for
cleaning. Wet a clean cloth with clean soapy water, rinse the cloth thoroughly,
and wipe the body of the Kick Scooter CITY making sure that water does not get
into the power button, charging port, the foot mats, or tires.
Battery maintenance and storage of your Kick Scooter CITY
Fully charge your battery before storing.
If you are storing your Kick Scooter CITY for an extended period of time, please fully
charge your Kick Scooter CITY at least once every three month.
If the ambient temperature of the storage location is below 0
°
, please do not charge.
You must bring the Kick Scooter CITY into a warmer environment before
charging. Check under Battery Information and Specifications for more details.
To prevent dust from getting into your Kick Scooter CITY, try wrapping it or
sealing it with its original packaging.
Store your Kick Scooter CITY indoors, in a dry and suitable temperature.
NOTE
Users who disassemble the Kick Scooter CITY will forfeit their right of warranty.
11. Thank You
Thank you for the purchase of your new Kick Scooter CITY, and thank for taking the time to read the User Manual. We hope that the information that you obtained
from this manual will help you safely operate, maintain and enjoy your Kick Scooter CITY for years to come. We appreciate your consideration and sincerely hope you
enjoy and share your Kick Scooter CITY experience with all of your friends, family members, and loved ones.
Thank you and welcome to the Kick Scooter CITY movement!
ENJOY YOUR Kick Scooter CITY!
iconBIT Team
3. Operating Principles
3.1. Operation
•
Hold the ON/OFF Button (under the LCD display) for 3 Seconds to turn the
scooter OFF or ON.
• Short press the ON/OFF Button for gear change.
• Double press the ON/OFF Button to turn ON/OFF the front and rear lights.
3.2. How to ride your Kick Scooter CITY
• Switch on the Kick Scooter CITY.
• Stand with a foot on the footboard.
•
Manually kick the scooter forward for initial speed (the motor will not engage
from a standing start).
• Press the accelerator lever down to accelerate and release to decelerate.
•
The hand operated brake is located on the handle bars, press the lever down
progressively to deccelerate.
3.3. PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
Step 1:
Getting Started
Take your scooter out of the box and place it flat on the floor.
Step 2:
Charging your Kick Scooter CITY
Make sure the Kick Scooter CITY is fully charged before your initial use. For charging instructions, please follow details in Section 8 under
Battery and Charging Specifications.
Step 3:
Wear all proper safety gear, including, but not limited to a helmet, knee pads, elbow pads, and wrist guards.
English 3/4
10. Scooter Specifications
•
Wheels:
8.5’’, tubeless
•
Max. speed:
Max. 20 km/h (StVZO conform in Germany - street legal)
•
Brakes:
EBS Brake, Rear Disc Brake
•
Motor:
Brushless Motor, 350W
•
Battery:
7.5 Ah (270 Wh)
•
Max. Weight:
100 kg
•
LED lights:
Front white light and reflector combination
(StVZO conform in Germany - street legal)
Side reflectors amber/yellow
(StVZO conform in Germany - street legal)
Rear red light and reflector combination
(StVZO conform in Germany - street legal)
•
Size:
109.5 x 42 x 49.5 cm (fold)
109.5 x 42 x 114.5 cm (unfold)
•
Weight:
17 kg
•
Charging Time:
5-6 h
