7
Rear Panel
1
5
4
2
3
1. USB 2.0 Connector
Connect it with the provided USB cable to your Mac/PC’s USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed of
UPorts6-VST.
2. Line inputs 3/4
These are unbalanced analog inputs on standard 1/4″ TS connectors at
–10dB line level.
3. Line outputs 1-2
These are unbalanced analog outputs on standard 1/4″ TS connectors at
+6dBU line level.
4. MIDI I/O connectors
MIDI input and output on standard 5-pin DIN connectors
5. 12V/1A power adaptor
Connect the provided power adaptor here.
Note:
UPorts6-VST is not able to work without the provided power adaptor
connected. The USB bus power is not able to provide sufficient power supply
for UPorts6-VST.
