ICON UltraFlo truflo UF-500 Series, Руководство по эксплуатации

Страница: 3 / 18

Notice : Is used to lead users to helpful information not related to personal injury.
Indicates a potential hazard. Failure to follow all
warnings may lead to equipment damage, injury,
or death.
Warning | Caution | Danger
Use of tool(s) may damage produced beyond
repair and potentially void product warranty.
Do Not Use Tools
Please always observe the following safety instructions!
Please pay attention to the safety instructions with the following pictograms and signal words in these operating instructions :
The Truflo ® UF-500 Series clamp-on ultrasonic flow meters are easy to install with exceptional long life performance and they
require no alteration to current piping configurations.
The sensor sends over 50 pulses/sec in order to provide accurate measurement of liquid flow rates in full pipes and can be used
in low pressure systems.
The Flow Meter UltraFlo ® should only be used for measuring the flow of pure, homogeneous liquids.
The UltraFlo ® is not intended for use in medical applications.
The volume flow meter UltraFlo ® is built in accordance with industry standard EN 61010 regulations (corresponds to VDE
0411 "Safety specifications for electrical measurement, control and laboratory devices").
The manufacturer is not liable for any injury, damage or harm due to inappropriate or unintended use or modifications of
the flow meter. Conversions and/or changes to the flow meter may only be made, if they are expressly performed in
accordance with the operating instructions in this operating manual.
Intended Use
Assembly, electrical installation, commissioning and maintenance of the flow meter must be carried out by
qualified, trained personnel. The qualified personnel must have read and understood the operating
instructions in this operating manual and must follow the operating instructions in this manual.
The installer has to ensure that the flow meter is correctly connected according to the electrical connection
diagrams in this operating manual.
Serious injury or death from electric shock may occur if wiring, installation, disassembly or removal of wires
is performed while electrical power is energized
Personnel for Installation, Commissioning and Operation
The manufacturer reserves the right to revise, alter, or modify the flow meter to the most current technology without special
prior notice. Further information about the latest updates and potential additions to these operating instructions are available
from Truflo.
Technological Progress
Wide Dynamic Flow Range 0.3 to 15 ft/s | 0.1 to 5 m/s
Light weight
Excellent External Corrosion Resistance
Convenience, Accuracy and Value in an Ultrasonic Flow Meter
3
23-0 166 © Icon Process Controls Ltd.
Safety Information
Product Description
UltraFlo
®
UF-500
Clamp-On Ultrasonic Flow Meter Sensor