ICON STEREO TUBE POWER AMPLIFIER, Руководство пользователя

Страница: 20 / 32

S.T.INNOVATORS
ICON rev.may 2010
20
11 Specifications
Power Output Stereo
Maximum output power per each channel
100 W RMS 4
Ω / 8 Ω load
Rated Frequency Band 20 Hz to 70 kHz
Frequency Response +0, +0.25 dB from 20Hz to 20,000Hz
+0, -3 dB from 15Hz to 70,000Hz
Total Harmonic Distortion
Maximum Total Harmonic Distortion at any power level
from 250 milliwatts to rated power
0.4% for 4 or 8
Ω load
Sensitivity 1 V unbalanced inputs
1 V balanced inputs
A-Weighted Signal To Noise Ratio 100 dB
Intermodulation Distortion 0.5% for 4 or 8 Ω load
Wide band Damping Factor Greater than 8
Input Impedance 100 k Ω unbalanced inputs
200 k Ω balanced inputs
Power Supply
Impulse power supply
120 V (from 100 to 135 V), 50/60 Hz at 10 А
230 V (from 195 to 260 V), 50/60 Hz at 5 А
Warm up time 3 minutes - smooth increment of heating voltage
Stand-by mode Available
Circuit type PPP – push pull parallel scheme class AB
Vacuum Tubes
All tubes are military type
Input Tubes: 2 x 6N1P-EV and 2 x 6N1P-VI
Driver Tubes: 2 x GU19-1
Output Tubes: 4 x GU50
Indicator Tubes for output power: 2 x EM800
Control Precise electronic control of Bias mode of the tubes
with indication for symmetry and tubes current tuning
Overall Dimensions (H x W x D)
250 x 475 x 520 mm
(H x W x D) including feet and knob
282 x 475 x 547 mm
Weight 38.7 kg