ICON QCon Pro G2, Руководство пользователя

Страница: 9 / 46

9
Nudge - Toggle small Nudge mode.
Click - Toggle playback or record metronome click.
Drop - Toggle Drop.
Replace - Toggle Replace.
Solo - Toggle track solo (of selected track).
8f) DAW Selector section
QconPro G2 has built-in Mackie Control, LogicPro protocols & HUI for different
DAW’s such as Cubase
TM
, Samplitude
TM
, Ableton Live
TM
, Logic Pro
TM
and
ProTools
TM
. By selecting the correct DAW and Mackie control (HUI/LogicPro)
protocol, QconPro G2 will automatically map the major functions and work
seamlessly with that DAW.
<< / >> buttons - These arrow buttons are used to scroll through the mode list.
The name of the mode will display on the LCD.
DAW button - Press to enter the mode selection.
To change your QconPro G2 Control mode, turn the power switch off and on to
enter the Control selection mode. Select your desired mode from the list with
the “<<” / “>>” buttons.
Tips: The DAW button cannot be activated if DAW software is running.
Tips: QconPro G2 will memorize your last selected mode and re-enter
the same mode a few seconds after it has been switched on. (i.e. mode
selection is not needed if the last mode is being used.)
9. Sub-control buttons
This section of control buttons varies in different DAWs. QconPro G2 is based on
Cobase
TM
for the settings.
(
Note:
For different DAWs the labeling may not be perfectly matched.)
9a) Assignment section
TRACK button -
Activate the track parameters of the software.
PAN/EQ/Send/Plug- in/Instrument buttons - These buttons are used to
activate the corresponding effect function of the DAW. They are typically
used in conjunction with the rotary encoder knobs. The button illuminates
when pressed. Then rotate the rotary encoder knob to adjust the value,
which will display on the LCD directly above.
9b) Automation section