ICON QCon Pro G2, Руководство пользователя

Страница: 7 / 46

7
3. Master fader
This 100mm motorized fader operates the same as the other 8 faders. It controls
your DAW software's master channel fader. Any parameter adjustments made
with this fader will be displayed directly above on the LCD display.
4. Channel level metering
The 12-led meter shows the associated channel level.
5. Dual function encoders
The dual function encoders act as push-button and rotary controls.
When an encoder is pressed, it may be used to change modes of operation
or to change what appears in the display above the channel strips. When an
encoder is rotated, depending on its assigned function, it can be used to adjust
a channel’s pan, send level, or plug-in parameters.
6. Encoder LED
The 11-LED’s surrounding the encoder light up to indicate the relative position of
the rotation without having to look at your computer.
7. Time display
This display shows the time location of your project in either SMPTE or Midi beat
clock format.
8. Control buttons
8a) Recording channel control buttons section
8b) Motorized fader control buttons section
LOCK button - Activate to lock all motorized faders.
FLIP button -
Press the FLIP button to swap the parameter settings
of the motorized faders and the rotary encoder knobs.
REC buttons - Activate and deactivate the recording state of the
associated channel. The switch will light red when the channel is armed.
SOLO buttons - Activate and deactivate the solo state of the associated
channel. The switch will light green when the channel solo state is on and
other channels will be muted. You can solo multiple channels by pressing
SOLO buttons on additional channels.
MUTE buttons - Activate and deactivate the mute state of the associated
channel. The switch will light blue when the channel is muted.
SEL buttons - The SEL buttons activate the associated channels in the
DAW software in order to perform a specific operation (for example, when
adjusting EQ with the ASSIGNABLE ENCODERS, the SEL switch will be
used to choose the channel you want to adjust). The switch will light red
when the channel is selected.