Assign MIDI function to the F1-F8 buttons
Select your desired MIDI functions for the F1-F8 buttons.
Note: Some DAW Mackie Control (such as Live) & HUI modes do not allow you to
change the F1-F8 button functions.
Assign MIDI functions to the knobs (User define mode only)
Select your desired MIDI functions for the knob.
Assign MIDI functions to the Jog wheel (User define mode only)
Select your desired MIDI functions for the jog wheel
“Save file” button
Click this button to save your current settings for the Qcon Lite. The file is an
“.qconlite” file.
“Load file” button
Click this button to load a previously saved “. qconlite” setting file for your Qcon Lite.
“Send Data” button
TM
Click this button to upload the iMap software settings to your Qcon Lite via
USB connection.
(Note: You must have connected your Qcon Lite to your Mac/PC, otherwise the settings
upload will not be successful.)
“MIDI Devices” button
Click this button, a MIDI device select window
will appear as shown in diagram 1. Please select
“ICON Qcon Lite” for the MIDI Out Devices.
“Firmware Upgrade” button
Click this button to enter into the firmware upgrade window for Qcon Lite.
Please refer to P.11 for the firmware upgrade procedure.
Diagram 1
4
5
6
7
8
9
10
11
10