ICON PX-Sub10A, Руководство пользователя

Страница: 8 / 14

Controls and Connections
SAT/SUB Input
Input for full bandwidth signal. The signal is processed according to
the High Pass setting and provided at the SAT/SUB Output.
1
2 4
5
7
1
2
3
4
5
6
PX-Sub10A
SAT/SUB
Right Channel Left Channel
In
Out
LFE
LFE/Slave
Slave
High Pass
80Hz
60Hz
Flat
HP
R L
Low Pass
50Hz 150Hz
Gain
Min Max
Out Phase
0
180
0
0
Mode
LFE
Slave
In
Out
3 6 8
9
10
SAT/SUB Output (Balanced)
Output to connect a satellite loudspeaker system. Signal is
processed according to the High Pass setting.
LFE/Slave Input
Input for LFE signal (Low Frequency Effect)
Slave Output
Output to next subwoofer (if installed)
High Pass Selectors
Allows cutting off low frequencies of the signal provided to the
SAT/SUB Output terminal. If "Flat" is selected, the signal is not
limited. If "HP" is selected, signal is cut off at 50 HZ or 80 HZ
(according to selection).
Unbalanced Output
Output to connect a satellite loudspeaker system.
Low Pass Selector
Controls the subwoofer low pass frequency continuously variable
from 50 to 150 HZ.
Phase Selector
phase can be set to 0 or 180
Gain
Main volume control
Mode Selector
Select "LFE" for normal and Master use. Select "Slave" setting for
second and all following subwoofers.
0 0
7
8
9
10
5