ICON ProCon D300 Series, Руководство по эксплуатации

Страница: 19 / 28

D300 Series Operating Manual
19 ◀◀
|
Measurement Setup
Electrode Setup
When the pH electrode connected to this instrument, you need to select the electrode type as “PH” in this item. It’s the same when the
electrode becomes OPR.
Temperature Setup
There are four kinds of temperature types: NTC2.252K , NTC10K , PT100 and PT1000, user needs to choose the right temp comp for the
electrode to display the right temperature. “Err” means no temp comp.
The user can compare the temperature measured by other standard instruments with the temperature measured by the D300. If there is
an error, you can use the “temperature offset” to modify it, assuming that the temperature measured by D300 is 25°C, and the temperature
measured by other standard instruments is 24.8°C. Then enter “-0.2°C” here, then press “Esc”, and then select “Save”.
You can choose Auto, Manual and None in `Temperature input`. Choosing `Auto` the temperature is from electrode. Choosing “Manual”,
user is able to input the temperature. Choosing “None” there will be no display of temperature, the default temperature of the system is
25°C as comp.
User can choose (°C) and (°F)
Temperature Offset Setting
Temperature Input Setting
Temperature Units Setting