ICON PRO-FORM SPORT POWER STACK XT, Руководство пользователя

Страница: 13 / 36

13
11. Using a plastic bag to keep your fingers clean,
apply grease to the barrel of an M10 x 64mm
Bolt Set (76).
Orient the Leg Lever (8) so that the welded
support (F) is on the side shown.
Attach the Leg Lever (8) to the Front Leg (7) with
the M10 x 64mm Bolt Set (76). Make sure that
the barrel of the Bolt Set is inserted through
both sides of the bracket on the Front Leg.
11
76
76
Grease
F
7
8
10. Tighten the two Upper Weight Guides (21) onto
the Lower Weight Guides (25).
Next, attach the Top Frame (4) to the Upper
Upright (3) with two M8 x 65mm Bolts (68), two
M8 Washers (59), and two M8 Locknuts (58). Do
not tighten the Locknuts yet.
Next, attach the Top Frame (4) to the Upper
Weight Guides (21) with two M10 x 25mm
Screws (77).
Then, tighten the two M8 Locknuts (58).
See steps 2, 4, 5, 6, and 7. Tighten the M10
Locknuts (56), the M8 Locknuts (58), the
M10 x 20mm Screws (72), and the M8 x 20mm
Screws (84) used in these steps.
10
4
3
58
77
59
59
68
58
25
21
Arm Assembly