ICON PRO-FORM POWER 795, Руководство пользователя

Страница: 14 / 40

14
10. With the help of a second person, hold the con-
sole assembly near the Right Handrail (87).
See the inset drawing. Connect the Upright
Wire (81) to the console wire. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Remove the wire tie from the
Upright Wire.
Console
Assembly
Wire Tie
87
81
81
Console
Wire
10
11. Set the console assembly on the Left and Right
Handrails (86, 87). Be careful not to pinch any
wires. Insert the excess Upright Wire (81) into
the Right Handrail.
Attach the console assembly with six #8 x
1/2" Screws (1), four 5/16" x 5/8" Screws (4),
and four 5/16" Star Washers (11); start all ten
Screws, and then tighten them.
Tighten the four 5/16" x 1" Flat Head Screws
(28) and the two 5/16" x 1" Screws (8) (only
one side is shown).
11
86
1
11
Console
Assembly
1
87
11
4
1
1
4
Console
Wire
28
8
81