8
5
5. The Console (4) can use four 1.5V D batteries
(not included); alkaline batteries are recom-
mended.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the screw, remove the
battery cover, and insert the batteries into the
battery compartment.
Make sure to orient the
batteries as shown by the diagrams inside
the battery compartment.
Then, reattach the
battery cover.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console, use
only a manufacturer-supplied power adapter.
Plug one end of the power adapter into the jack
on the console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
6. Untie and discard the wire ties on the Main Wire
Harness (43) and the Pulse Extension Wire
(79).
While another person holds the Console (4)
near the Upright (2), wires on the Console to
the Main Wire Harness (43) and to the Pulse
Extension Wire (79).
Insert the excess wire into the Upright (2) or
into the Console (4).
Tip: Avoid pinching the wires.
Attach the
Console (4) to the Upright (2) with four M4 x
16mm Flange Screws (80).
2
6
4
80
79
80
43
Battery
Cover
Batteries
Screw
Batteries
4
Avoid pinching
the wires
All manuals and user guides at all-guides.com
