19
HOW TO USE AN IFIT CARD
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
13.
2. Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET-
TINGS on page 13.
3. Insert an iFit card and select a workout.
To use an iFit workout, insert an iFit card into the
iFit slot; make sure that the iFit card is oriented so
the metal contacts are face-down and are inserted
into the iFit slot. When the iFit card is properly in-
serted, the iFit logo will light.
Next, select an iFit workout by pressing the iFit in-
crease or decrease button. When an iFit workout is
selected, the display will show the name, duration,
maximum incline setting, and maximum speed set-
ting of the workout. In addition, a profile of the
speed settings of the workout will appear in the dis-
play.
Each iFit workout is divided into several one-
minute segments. One speed setting and one in-
cline setting are programmed for each segment.
Note: The same speed and/or incline setting may
be programmed for consecutive segments.
4. Start the walking belt.
Press the Start button to start the workout. A mo-
ment after you press the button, the treadmill will
automatically adjust to the first speed and incline
settings of the workout. Hold the handrails and
begin walking.
During the workout, the voice of a personal trainer
will guide you through the workout. You can adjust
the volume for your personal trainer (see HOW TO
PERSONALIZE CONSOLE SETTINGS on page
13).
If the speed or incline setting for the current seg-
ment is too high or too low, you can override the
setting by pressing the speed or incline buttons;
however, when the next segment begins, the
treadmill will automatically adjust to the speed
and incline settings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton. The walking belt will begin to move at 1 mph.
When the next segment of the workout begins, the
treadmill will automatically adjust to the speed and
incline settings for the next segment.
5. Select a display mode and monitor your
progress with the display and the intensity
level bar.
See step 5 on page 16.
6. Turn on the fan if desired.
See step 8 on page 15.
7. When you are finished exercising, remove the
key from the console.
See step 9 on page 15.
CAUTION: Always remove iFit cards from the
iFit slot when you are not using them.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the consoleʼs
sound system, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Locate the audio wire below the display on the con-
sole, and plug it into a jack on your MP3 player, CD
player, or other personal audio player.
Make sure that
the audio/video cable is fully plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume on your MP3 player, CD player, or other per-
sonal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
iFit Slot
iFit Card
