ICON P1-NANO, Руководство пользователя

Страница: 16 / 61

16
This is covered in more detail in the iMAP section of this manual on page 49, but
here's a general introduction.
Just so we understand the general principle, we are going to allocate button 1, 2 and 3
on the P1-Nano, to Bitwig, Cubase and Logic Pro respectively.
1
2
So, you've downloaded, installed and opened the iMAP. You will see the three DAW
buttons on top of the iMAP. These correspond to the three DAW buttons on the P1-
Nano.
Simply select the corresponding button of choice and select a DAW from the drop
down list.
The DAW will be automatically allocated. There is no need to send data, or perform
any special function.
You may do this for all three buttons on the iMAP/P1 Nano.
Please go to the iMAP section on page 45 for further details on this and how to use the
iMAP, including how to allocate commands and functions to the 16 panel touchscreen,
MIDI map commands and even allocate QWERTY hot keys to your P1 Nano.
Remember that, in everyday use, YOU MUST ENSURE YOU LAUNCH THE IMAP
FIRST, then the P1 Nano, before launching the DAWs you wish to work with;
Remember:
Step 1: Switch on the iMap
Step 2: Switch on the controller
Step 3: Launch the DAW/s you intend to use
Or simply remember the letters ICD;
i
MAP
C
ontroller
D
AW/s
(You may wish to associate a phrase that will make this easy to remember i.e. “I Can
Do (It)!”)
How to Allocate DAWs to the DAW buttons in
the iMAP