ICON NordicTrack S27i Скачать руководство пользователя страница 30

Страница: 30 / 40

MAINTENANCE

Regular maintenance is important for optimal

performance and to reduce wear. Inspect and properly

tighten all parts each time the studio cycle is used.

Replace any worn parts immediately. Use only

manufacturer-supplied parts.

To clean the studio cycle, use a damp cloth and a small

amount of mild soap. IMPORTANT: To avoid damage

to the console, keep liquids away from the console

and keep the console out of direct sunlight.

PEDAL MAINTENANCE

Tighten the pedals weekly using the included studio

cycle tool. Tighten the right pedal clockwise, and

tighten the left pedal counterclockwise.

CONSOLE TROUBLESHOOTING

If the console does not turn on, make sure that the

power adapter is fully plugged in and that the power

switch is pressed on.

If a replacement power adapter is needed, see the

back cover of this manual. IMPORTANT: To avoid

damaging the console, use only a manufacturer-

supplied regulated power adapter.

If you are having problems connecting the console

to a wireless network or if you are having problems

with your iFIT account or iFIT workouts, go to

support.iFIT.com.

If the console does not boot

up properly, or if the con-

sole freezes and does not

respond, reset the console

to the factory default set-

tings. IMPORTANT: Doing

this will erase all custom

settings you have made

to the console. Resetting

the console requires two people. First, press the

power switch and unplug the power adapter. Next,

locate the small reset opening (A) on the top of the

console. Using a bent paper clip, press and hold the

reset button inside the opening, and have a second

person plug in the power adapter and press the power

switch. Continue holding the reset button until the

console turns on. When the reset operation is com-

plete, the console will turn off and then turn back on.

If it does not, press the power switch and unplug the

power adapter, and then plug it in again and press the

power switch. Once the console turns on, check for

firmware updates (see HOW TO CHANGE CONSOLE

SETTINGS on page 28). Note: It may take a few

minutes for the console to be ready for use.

MAINTENANCE AND TROUBLESHOOTING

Содержание NordicTrack S27i









































Результаты поиска

Содержание NordicTrack S27i

Отзывы:

Похожие инструкции для NordicTrack S27i

Бренды по названию

Популярные бренды

ICON NordicTrack S27i, Руководство пользователя

Результаты поиска

Содержание NordicTrack S27i

Отзывы:

Похожие инструкции для NordicTrack S27i

Бренды по названию

Популярные бренды