15
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
IMPORTANT: To activate your console and begin
using its exclusive features, see assembly step 12
on page 13.
The treadmill console offers a selection of features
designed to make your workouts more effective and
enjoyable. When you use the manual mode, you can
change the speed and incline of the treadmill with the
touch of a button. As you exercise, the console will dis-
play instant exercise feedback. You can even measure
your heart rate with the handgrip heart rate monitor or
the optional chest heart rate monitor (see page 18).
You can also connect your tablet to the console and use
the iFit
®
–Smart Cardio Equipment app to record and
track your workout information.
To turn on the power,
see this page.
To use the
manual mode,
see page 16.
To connect your tablet
to the console,
see page 17.
To connect your heart
rate monitor to the console,
see page 18.
To use
the information mode,
see page 18.
To
adjust the height of the desk,
see page 19.
Note: The console can display speed and distance in
either miles or kilometers. To
fi
nd which unit of mea-
surement is selected, see THE INFORMATION MODE
on page 18. For simplicity, all instructions in this sec-
tion refer to miles.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The
fi
rst time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 23).
HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
Plug in the power cord
(see page 14). Next, locate
the power switch on the
treadmill frame near the
power cord. Press the
power switch into the reset
position.
Next, stand on the foot
rails of the treadmill.
Find the clip attached
to the key and slide the
clip onto the waistband
of your clothes. Then,
insert the key into
the console. After a
moment, the displays
will light.
IMPORTANT: In an emergency, the key can
be pulled from the console, causing the walking
belt to slow to a stop. Test the clip by carefully tak-
ing a few steps backward; if the key is not pulled
from the console, adjust the position of the clip.
Reset
Key
Clip
Содержание NordicTrack NTL14815.4
Страница 5: ...5 all STANDARD SERVICE PLANS...