ICON NordicTrack C 9.5 Скачать руководство пользователя

Страница: 34 / 44

MAINTENANCE

Regular maintenance is important for optimal

performance and to reduce wear. Inspect and properly

tighten all parts each time the elliptical is used.

Replace any worn parts immediately.

To clean the elliptical, use a damp cloth and a small

amount of mild soap. IMPORTANT: To avoid damage

to the console, keep liquids away from the console

and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If the console does not turn on, make sure that the

power cord is fully plugged in.

If the console does not display your heart rate when

you hold the handgrip heart rate monitor, or if the dis-

played heart rate appears to be too high or too low, see

step 5 on page 23.

INCLINE SYSTEM TROUBLESHOOTING

If the ramp does not move to the correct incline level,

see step 4 on page 31 and calibrate the incline

system.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted. To adjust the reed

switch, first unplug the power cord.

Using a standard

screwdriver, pry off the left

Disc (71).

Note: For clarity, the left shield and the left disc ring are

shown removed in the drawing below.

Locate the Reed Switch (38). Turn the Pulley (19) until

a Magnet (43) is aligned with the Reed Switch.

Slightly loosen the indicated M4 x 16mm Screw (101).

Slide the Reed Switch (38) slightly closer to or away

from the Magnet (43), and then retighten the Screw.

Then, plug in the power cord, and rock the Pulley (19)

forward and backward just enough that the Magnet

passes the Reed Switch repeatedly.

Repeat these actions until the console displays correct

feedback. When the reed switch is correctly adjusted,

reattach the left disc. Then, plug in the power cord.

101

MAINTENANCE AND TROUBLESHOOTING

Содержание NordicTrack C 9.5













































Результаты поиска

Содержание NordicTrack C 9.5

Отзывы:

Похожие инструкции для NordicTrack C 9.5

Бренды по названию

Популярные бренды

ICON NordicTrack C 9.5, Руководство пользователя

Результаты поиска

Содержание NordicTrack C 9.5

Отзывы:

Похожие инструкции для NordicTrack C 9.5

Бренды по названию

Популярные бренды