background image

21

HOW TO SET UP THE CONSOLE 

Before using the treadmill for the first time, set up the 

console. 

1.  Connect to your wireless network.

   To access the internet, download iFit workouts, and 

use several other features of the console, you must 

be connected to a wireless network. Follow the 

prompts on the screen to connect the console to 

your wireless network.

2.  Customize settings.

   Fill in the form on the screen to set the console 

to display the desired unit of measurement and 

your time zone. Note: If you need to change these 

settings later, see HOW TO CHANGE CONSOLE 

SETTINGS on page 26.

3.  Log into or create an iFit account.

   Provide your email address, and follow the prompts 

on the screen to sign up for or log into your iFit 

account.

4.  Tour the console.

   The first time you turn on the treadmill, dialogue 

boxes on the screen will guide you through the 

features of the console. 

5.  Check for firmware updates.

   First, touch your name or Hello on the screen, and 

then touch Settings. Next, select the maintenance 

section. Then, touch Update to check for firmware 

updates using your wireless network. See step 5 

on page 26 for more information.

6.  Calibrate the incline system.

   First, touch your name or Hello on the screen. 

Next, select the settings main menu. Then, select 

the maintenance section, touch Calibrate Incline

and then touch Begin to calibrate the incline sys-

tem. See step 6 on page 26 for more information.

The console is now ready for you to begin working out. 

The following pages explain the various workouts and 

other features that the console offers.

To use the manual mode, see page 22. To use a 

map workout, see page 23. To use a draw your own 

map workout, see page 24. To use a distance or 

time workout, see page 25.

To view or change console settings, see page 26. 

To connect to a wireless network, see page 27. To 

use the sound system, see page 28. 

IMPORTANT: If there are sheets of plastic on the 

console, remove the plastic. To prevent damage 

to the walking platform, wear clean athletic shoes 

while using the treadmill. The first time you use 

the treadmill, observe the alignment of the walking 

belt, and center the walking belt if necessary (see 

page 32).

Содержание NordicTrack C 1000









































Отзывы: