ICON iConPad, Руководство пользователя

Страница: 21 / 28

21
2.3 Note
Assign the note value from -1(C) to 9(G) to the selected pad
2.4 Pad delay
Pad delay is the setting to improve the pad echo problem (i.e. two drum sounds
with one hit). Only one message (i.e. the drummer hit) will be sent within the
selected time zone (e.g. 25ms) to avoid echo happening, in which a second
message is sent due to vibration after the drummer hit.
2.5 Curve
Assign one of the five available velocity curves to the pad and the same velocity
curve will be applied to the same layer. To assign your own velocity curve,
please select “User defined” at the end of the drop-down menu.
2.6 User defined curve
Select and assign the fixed velocity curve value from 20-127 to the pads
3
3.1
3.2 3.3 3.4
Diagram 29
2.8 Save and Exit button
Click to save and exit the Drum Pad
setting window. This will let you return
to the main controller assignment panel
again.
3. “Save file” button
Click this button to save your current settings for the iConPad. The file is an
“.iconpad” file.
3.1 “Load file” button
Click this button to load a previously saved “.iconpad” setting file for your
iConPad.
2.7 3-layer buttons
You may make a different mapping to each
of the three layers.
Diagram 27
Diagram 28