ICON iConPad, Руководство пользователя

Страница: 19 / 28

19
1.3 MIDI Channel (Chan)
Assign MIDI channel from 0-16
1.4 MIDI Message
There are three different types of midi message including Note, CC and Program
value. Their parameters are as shown in the table below:
MIDI Message Type Parameters
Note -1(C) to 9(G)
CC 0 to 127
Program 0 to 127
1.5 Trigger mode
This function allows you to assign all the buttons (except pads) and the knob’s
enter setting (click the lower part of the knob). There are four different settings
on this drop-down menu as follow:
Toggle Midi message will be send and activate once
Momentary Midi message will stay active.
All Toggle
The toggle setting will be assigned to all the buttons and
knobs on the same layer.
All Momentary
The momentary setting will be assigned to all buttons and
knobs on the same layer.
Tip: Different settings can be assigned to each of the four layers
1.6 Gradual & Instant button (For fader)
Gradual
Activate to allow the faders to work as conventional faders. The
value will change gradually while you are sliding your finger
Instant
The fader value will jump instantly wherever your finger taps the
touch fader.
1.7 4-layer buttons (Control mode: User Defined)
You may make a different mapping for each of the four layers.
Diagram 24