1. With the visor in the full open position, apply downward pressure to
each of the stop tabs located rearward of the visor edge.
2. With stop tabs depressed, rotate the visor rearward, the locator
pins will ‘POP’ the visor out of it’s track.
3. To replace the visor, align the pivot posts to the pivot tracks on
each side of the helmet.
4. With each side equally aligned squeeze the visor into the pivot
tracks on each side of the helmet while applying downward pressure
to the stop tabs.
5. Once the visor is aligned to the pivot tracks rotate the visor
forward, the stop tabs will lift, locking the visor into the pivot tracks.
VISOR REMOVAL
13
14
REMOVAL & INSTALLATION
HELMLINK
TM
COMMUNICATOR UPGRADE
ICON worked with SENA Communications to develop a
bluetooth communicator system that works seemlessly
with the DOMAIN helmet. The Helmlink
TM
Bluetooth
®
accessory unit replaces the side and rear accessory
covers
_MESH TECHNOLOGY
_BLUETOOTH 5
_FM RADIO
_EXTRA LONG BATTERY LIFE
_EASY TO FIND FLUSH BUTTONS
_INTEGRATED REAR LIGHT
SOLD SEPARATELY
To order the HELMLINK
TM
Bluetooth
®
accessory unit visit
your local dealer or www.rideicon.com.
SAFETY WARNING:
Before operating any helmet communication system
be aware of and understand the local, regional, national and international
requirements regarding communication device use when operating a motor
vehicle, for all areas in which you intend to travel.
DomainManual_5-05-22.indd 13-14
DomainManual_5-05-22.indd 13-14
5/6/22 4:08 PM
5/6/22 4:08 PM
