7
1
2
4
5
7
6
3
Front Panel
1. “Mic/Inst” Inputs 1/2
Unbalanced instrument and mic level inputs. These hybrid connectors will accept a
standard 3-pin XLR plug or a 1/4” TS connector.
2. 48V phantom power switch
When this switch is in the IN position, +48V phantom power is supplied to the XLR
input. This phantom power circuit is suitable for most condenser microphones.
3. Input gain level controls 1/2
This potentiometer controls the input level of its associated analog
Mic/Instrument input.
4. Master level control
This potentiometer controls the master output level of the analog outputs.
5. Headphone level control
The potentiometer controls the output level of the headphone output.
6. Headphone output
This output jack accepts a standard 1/4″ stereo TRS headphone connector.
7. Hardware / PC Monitoring Control (Direct Monitor)
Hardware direct monitoring ( Clockwise - "Direct Out" ) eliminates the latency or
delay inherent in even the best internal circuitry while listening to your input and
existing tracks. You can also listen to your input complete with effects (Counter-
Clockwise - "PC") while recording by using extremely the low-latency ASIO
monitoring.
