10
7.
IMPORTANT: To avoid damaging the
Crossbar (64), do not use power tools and do
not overtighten the #10 x 3/4" Screws (5).
Attach the Crossbar (64) to the Handrail (63)
with two #10 x 3/4" Screws (5) and two #10 Star
Washers (31);
start both Screws, and then
tighten them.
Then, tighten the four M8 x 50mm Screws (4).
7
64
63
5
5
4
4
6
3
3
A
6.
Carefully set the console assembly (A) onto the
Handrail (63).
Attach the console assembly (A) with four #8 x
3/4" Screws (3);
start all four Screws, and then
tighten them.
Make sure that the console wire
(B) is not pinched.
B
3
63
31
31