29
HOW TO MAINTAIN THE EXERCISE BIKE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and properly
tighten all parts each time the exercise bike is used.
Replace any worn parts immediately. Use only
manufacturer-supplied parts.
To clean the exercise bike, use a damp cloth and a
small amount of mild detergent.
IMPORTANT: To
avoid damage to the console, keep liquids away
from the console and keep the console out of
direct sunlight.
HOW TO MAINTAIN THE PEDALS
Tighten the pedals weekly. Tighten the
right
pedal
clockwise
, and tighten the
left
pedal
counterclockwise
.
HOW TO TROUBLESHOOT THE CONSOLE
If the console does not turn on, make sure that the
power adapter is fully plugged in.
If you are having problems connecting the console
to a wireless network, or if you are having problems
with your iFIT account or iFIT workouts, go to
support.iFIT.com.
If a replacement power adapter is needed, call the
telephone number on the cover of this manual.
IMPORTANT: To avoid damaging the console, use
only a manufacturer-supplied regulated power
adapter.
If the console does not
boot up properly, or if the
console freezes and does
not respond, reset the con-
sole to the factory default
settings.
IMPORTANT:
Doing this will erase all custom settings you have
made to the console.
Resetting the console requires
two people. First, unplug the power adapter. Next,
locate the small reset opening (A) on the back or the
side of the console. Using a bent paper clip, press and
hold the reset button inside the opening, and have a
second person plug in the power adapter. Continue
holding the reset button until the console turns on.
When the reset operation is complete, the console will
turn off and then turn back on. If it does not, unplug
and then plug in the power adapter. Once the console
turns on, check for fi rmware updates (see HOW TO
CHANGE CONSOLE SETTINGS on page 26). Note:
It may take a few minutes for the console to be ready
for use.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed switch,
first unplug the power
adapter.
Next, locate the Reed Switch (57) on the
left side of the exercise bike. Slightly loosen the two
M4 x 20mm Screws (87).
Next, turn the Left Crank Arm (19) until a Magnet (62)
is aligned with the Reed Switch (57). Slide the Reed
Switch slightly toward or away from the Magnet. Then,
retighten the M4 x 20mm Screws (87).
Plug in the power adapter and turn the Left Crank Arm
(19) for a moment. Repeat the procedure above, if nec-
essary, until the console displays correct feedback.
When the Reed Switch (57) is correctly adjusted, plug
in the power adapter.
A
19
87
62 57
MAINTENANCE AND TROUBLESHOOTING
Содержание Pro-Form Studio Bike Pro 22
Страница 4: ...4 STANDARD SERVICE PLANS...