9
7
72
A
78
7. Identify the Right Handrail Top (72). Set the
Right Handrail Top on the Handrail (76), and
slide it forward against the console assembly (A).
Next, slide the Right Handrail Bottom (74)
upward. Make sure that the Upright Wire (78)
is covered by the Right Handrail Bottom
and is not pinched. Attach the Right Handrail
Bottom with four #8 x 3/4" Screws (29); start
all four Screws, then tighten them. Note:
The Screws need to be inserted at an angle
as shown. Be careful not to overtighten the
Screws.
Attach the Left Handrail Top (not shown)
and the Left Handrail Bottom (not shown) as
described above. Note: There are no wires on
the left side.
76
74
6. Connect the Upright Wire (78) to the con-
sole wire (B). The connectors should slide
together easily and snap into place with an
audible click. If they do not, turn one connec-
tor and try again.
Insert any excess wire into the console
assembly (A).
6
B
A
78
29
29
