background image

32

HOW TO USE THE WIRELESS NETWORK MODE

The console features a wireless network mode that 
allows you to set up a wireless network connection.

1.  Select the settings main menu.

 

See step 1 on page 28.

2.  Select the wireless network mode.

 

 In the settings main menu, touch the Wireless 
Network button to enter the wireless network mode.

3. Enable 

Wi-Fi.

 

 Make sure that the Wi-Fi

®

 checkbox is marked 

with a green checkmark. If it is not, touch the Wi-Fi 
menu option once and wait for a few seconds. The 
console will search for available wireless networks. 

 4.  

Set up and manage a wireless network 
connection.

 

 When Wi-Fi is enabled, the screen will show a list 
of available networks. Note: It may take several 
seconds for the list of wireless networks to appear.

 

 Make sure that the checkbox on the Network 
notification menu option is marked with a green 
checkmark to have the console notify you when a 
wireless network is within range and available.

 

 Note: You must have your own wireless network 
and an 802.11b/g/n router with SSID broadcast 
enabled (hidden networks are not supported). 

 

 When a list of networks appears, touch the desired 
network. Note: You will need to know your network 
name (SSID). If your network has a password, you 
will also need to know the password.

 

 An information box will ask if you want to connect 
to the wireless network. Touch the Connect button 
to connect to the network or touch the Cancel but-
ton to return to the list of networks. If the network 
has a password, touch the password entry box. A 
keyboard will appear on the screen. To view the 
password as you type it, touch the Show Password 
checkbox.

 

 To use the keyboard, see HOW TO USE THE 
TOUCH SCREEN on page 21.

 

 When the console is connected to your wireless 
network, the WiFi menu option at the top of the 
screen will display the word CONNECTED. Then, 
touch the back button on the screen to return to the 
wireless network mode.

 

 To disconnect from a wireless network, select the 
wireless network and then touch the Forget button.

 

 If you are having problems connecting to an 
encrypted network, make sure that your password 
is correct. Note: Passwords are case-sensitive.

 

 Note: The iFit mode supports unsecured and 
secured (WEP, WPA™, and WPA2™) encryption. 
A broadband connection is recommended; perfor-
mance depends on connection speed. 

 

 Note: If you have questions after following 
these instructions, go to support.iFit.com for 
assistance.

5.  Exit the wireless network mode.

 

 To exit the wireless network mode, touch the back 
button on the screen.

Содержание Pro-Form Pro 9000













































Отзывы: