9
4. Hold the Right Upright (90) against the Base (6).
Make sure not to pinch the Upright Wire (81).
Attach the Right Upright (90) with two 3/8" x
2 3/8" Screws (7), a 3/8" x 1 1/4" Screw (63),
a 3/8" x 1 3/4" Screw (62), and four 3/8" Star
Washers (13) as shown;
do not fully tighten
the Screws yet.
Attach the Left Upright (not shown) in the
same way.
Note: There are no wires on the left
side.
4
63
62
6
13
13
90
7
13
5.
Remove and save the four indicated 5/16" x
3/4" Screws (8).
Identify the Left and Right Base Covers (82, 83).
Slide the Left Base Cover onto the Left Upright
(89), and slide the Right Base Cover onto the
Right Upright (90).
Do not press the Base
Covers into place yet.
82
90
83
5
89
81
8
8
