10
6.
See the upper drawing.
With the help of a
second person, orient the Console (5), the
Console Cover (7), and the Console Bracket
(4) as shown. Then, route the wire (A) on the
Console through the Console Cover and the
Console Bracket.
See the lower drawing. Tip: Avoid pinching
the wire (A).
Attach the Console (5) and the
Console Cover (7) to the Console Bracket (4)
with four M4 x 22mm Screws (107);
start all the
Screws, and then tighten them.
6
7
7. While a second person holds the Console
Bracket (4) near the Frame (1), connect
the wire (A) on the Console (5) to the Main
Wire (115).
Tip: The wire connectors should
slide together easily and snap into place with
an audible click. If they do not, turn one con-
nector and try again.
Tip: Avoid pinching the wires.
Attach the
Console Bracket (4) to the Frame (1) with two
M8 x 86mm Screws (109) and two M8 x 15mm
Screws (96);
start all the Screws, and then
tighten them.
5
5
7
7
4
A
4
107
A
Avoid pinching
the wire (A)
4
96
96
109
115
A
Avoid
pinching
the wires
1
5
Содержание Pro-Form CARBON HIIT H10
Страница 4: ...4 UTS all STANDARD SERVICE PLANS...
