6
• Remove the packing materials. Do not dispose of
the packing materials until you
fi
nish the assem-
bly steps.
•
After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
ASSEMBLY
2
1.
Make sure that the power cord is unplugged.
Using your foot, press down the lever on the
Latch Frame (59) and raise the Uprights (50, 53)
until they lock into the upright position.
Be care-
ful not to pinch hands or
fi
ngers.
59
50
53
2. Orient the Tablet Holder (62) as shown. Align
and insert the heads of the four indicated
#8 x 3/4" Shoulder Screws (15) into the four
holes in the Tablet Holder. Next, slide the Tablet
Holder downward until it snaps into place.
62
15
3
3.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 15 and 16). Note: Extra hardware
may be included.
