18
21. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex key in a secure
place; the hex key is used to adjust the walking belt (see pages 29 and 30). Note: Extra hardware may be
included.
19
100
100
103
F
O
Start First
19. Press the two tabs (not shown) on the Tablet
Holder (103) into the slots (O) in the console
assembly (F).
Then, attach the Tablet Holder (103) with four
#8 x 5/8" Machine Screws (100). Tip: Start the
two upper Machine Screws first, and then
start the two lower Machine Screws. Do not
overtighten the Machine Screws.
IMPORTANT: The Tablet Holder (103) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
20. IMPORTANT: You must activate your
Console (80) to begin using its exclusive
features.
First, plug in the power cord (see page 19) and
turn on the power (see page 21).
Then, using your smartphone or tablet, go to
iFit.com/activate and follow the instructions to
activate the Console (80).
Note: If you do not have a smartphone or tablet,
use your computer to go to iFit.com/activate for
an alternate way to activate the Console (80). If
you do not have a computer, call Customer Care
(see the front cover of this manual).
20
80
