ICON Health & Fitness NordicTrack GRT 300 Скачать руководство пользователя | Manualshive

Страница: 6 / 27

6

Before beginning assembly, carefully read the
following information and instructions:

• Assembly requires two people.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing
materials until assembly is completed.

• Tighten all parts as you assemble them, unless

instructed to do otherwise.

• As you assemble the weight bench, make sure all

parts are oriented as shown in the drawings.

• For help identifying small parts, use the PART

IDENTIFICATION CHART on page 5.

The following tools (not included) are required
for assembly:

• Two adjustable wrenches

• One rubber mallet

• One standard screwdriver

• One Phillips screwdriver

• Lubricant, such as grease or petroleum jelly,

and soapy water.

Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.

Make Things Easier for Yourself

Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.

23

2

Numbers

on this

side

Numbers

on this

side

Holes

on this

side

1

77

22

50

74

77

ASSEMBLY

1.

Press a 2” x 3” Square Inner Cap (50) into the
end of the Right Base (22).

Identify the Right Upright (2) by the positions of
the numbers and the holes. Attach the Right
Upright to the Right Base (22) with two M10 x
62mm Carriage Bolts (74) and two M10 Nylon
Locknuts (77). Note: Be sure that the numbers
on the Right Upright are on the side shown.
Do not tighten the Nylon Locknuts yet.

Repeat this step with the Left Base (23) and the
Left Upright (1). Note: Be sure the numbers on
the Left Upright are on the side shown in the
inset drawing.

1

Before beginning assembly, make sure you
understand the information in the box
above. Important: Some of the parts
described in the assembly steps may be
pre-assembled.

All manuals and user guides at all-guides.com

all-guides.com

«
...
4
5
6
7
8
...
»

Содержание NordicTrack GRT 300




























Отзывы:

Нет отзывов

Похожие инструкции для NordicTrack GRT 300

Бренд: Gregster Страницы: 38

Бренд: Force USA Страницы: 16

Бренд: Gold's Gym Страницы: 4

Бренд: Gold's Gym Страницы: 12

Бренд: Gold's Gym Страницы: 20

Бренд: Deltech Fitness Страницы: 7

Бренд: Inspire Страницы: 23

Бренд: Inspire Страницы: 30

Бренд: ParaBody Страницы: 26

Pro-Form Pro R10

Бренд: ICON Health & Fitness Страницы: 32

Бренд: XMark Fitness Страницы: 23

heritage G102 multigym

Бренд: York Fitness Страницы: 34

Бренд: Life Fitness Страницы: 6

Бренд: Paramount Fitness Страницы: 28

Бренд: Taurus Страницы: 28

Бренд: Rugged Computing Страницы: 22

Бренд: Northern Lights Страницы: 5

Бренд: MARBO-SPORT Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды