7
3
130
53
53
133
2. Attach a Wheel (53) to one side of the
Stabilizer (3) with an M10 x 70mm Bolt (130) and
an M10 Locknut (133); do not overtighten the
Locknut; the Wheel should turn freely.
Attach the other Wheel (53) in the same way.
2
3. Tip: Avoid pinching the wires. With the help of
one or two other people, set the Upright (4) on
the pins (A) on the Frame (2).
Attach the Upright (4) to the Frame (2) with
eight M10 x 25mm Screws (123); start all the
Screws, and then tighten them.
Then, connect the 41" Wire (52) in the
Upright (4) to the 17" Wire (51) in the Frame (2).
3
4
2
2
A
52
51
123
123
Avoid
pinching
the wires
A
