background image

3

IMPORTANT PRECAUTIONS

    WARNING:

 To reduce the risk of serious injury, read all important precautions and 

instructions in this manual and all warnings on your studio cycle before using your studio cycle. 

ICON assumes no responsibility for personal injury or property damage sustained by or through the 

use of this product.

1.  It is the responsibility of the owner to ensure 

that all users of the studio cycle are ade-

quately informed of all precautions. 

2.  Before beginning any exercise program, 

consult your physician. This is especially 

important for persons over age 35 or persons 

with pre-existing health problems.

3.  The studio cycle is not intended for use by 

persons with reduced physical, sensory, or 

mental capabilities or lack of experience and 

knowledge, unless they are given supervi-

sion or instruction about the use of the 

studio cycle by someone responsible for 

their safety.

4.  Use the studio cycle only as described in this 

manual.

5.  The studio cycle is intended for home use 

only. Do not use the studio cycle in a com-

mercial, rental, or institutional setting.

6.  Keep the studio cycle indoors, away from 

moisture and dust. Do not put the studio 

cycle in a garage or covered patio, or near 

water.

7.  Place the studio cycle on a level surface, with 

a mat beneath it to protect the floor or carpet. 

Make sure that there is at least 2 ft. (0.6 m) of 

clearance around the studio cycle. 

8.  Inspect and properly tighten all parts each 

time the studio cycle is used. Replace 

any worn parts immediately. Use only 

manufacturer-supplied parts.

9.  Always plug the power adapter into the 

studio cycle before you plug it into an outlet.

10. Keep children under age 16 and pets away 

from the studio cycle at all times.

11. The studio cycle should not be used by 

persons weighing more than 350 lbs. 

(159 kg).

12. Wear appropriate clothes while exercising; 

do not wear loose clothes that could become 

caught on the studio cycle. Always wear ath-

letic shoes for foot protection.

13. Be careful when mounting and dismounting 

the studio cycle.

14. Always keep your back straight while using 

the studio cycle; do not arch your back.

15. The studio cycle does not have a freewheel; 

the pedals will continue to move until the 

flywheel stops. Reduce your pedaling speed 

in a controlled way.

16. To stop the flywheel quickly, press the brake 

knob downward.

17. Over exercising may result in serious injury 

or death. If you feel faint, if you become short 

of breath, or if you experience pain while 

exercising, stop immediately and cool down.

Содержание NordicTrack Commercial S15i Studio Cycle





































Отзывы: