![background image](http://html1.mh-extra.com/html/icon-health-and-fitness/freemotion-t10-9b-reflex/freemotion-t10-9b-reflex_user-manual_3483346022.webp)
22
HOW TO CONNECT YOUR HEART RATE MONITOR
TO THE CONSOLE
The console is compatible with all Bluetooth Smart
heart rate monitors.
To connect your Bluetooth Smart heart rate monitor to
the console, press the iFit Sync button on the console;
the console pairing number will appear in the display.
When a connection is established, the LED on the
console will flash red twice.
Note: If there is more than one compatible heart rate
monitor near the console, the console will connect to
the heart rate monitor with the strongest signal.
To disconnect your heart rate monitor from the console,
press and hold the iFit Sync button on the console until
the LED on the console turns solid green.
Note: All Bluetooth connections between the console
and other devices (including any tablets, heart rate
monitors, and so forth) will be disconnected.
THE MAINTENANCE MODE
The console features a maintenance mode that keeps
track of treadmill information and allows you to person-
alize console settings.
To select the maintenance mode, hold down the Pause
Stop button while inserting the key into the console,
and then release the Pause Stop button. When the
maintenance mode is selected, press the Pause Stop
button to access the optional screens. Then, press the
Speed increase button to change settings.
UNITS—This display will show which unit of measure-
ment is selected. To view distance in miles, select
UNITS ENGLISH. To view distance in kilometers,
select UNITS METRIC.
INCLINE CALIBRATION—This display is used to
calibrate the incline system. To calibrate the incline
system, press the Incline increase and decrease
buttons.
SOFTWARE VERSION—This display will show the
current versions of various software on the console.
TOTAL TIME—This display will show the total number
of hours that the treadmill has been used.
TOTAL BELT TIME—This display will show the total
number of hours that the walking belt has moved.
TOTAL LIFT TIME—This display will show the total
number of hours that the lift motor has been used.
IDLE TIME—This display allows you to adjust the
amount of time that will pass before the console goes
to sleep after no buttons have been pressed.
PAUSE TIME—This display allows you to adjust the
amount of time that will pass before the console will
reset the displays after the walking belt has been
paused.