Icom UHF IC-FR6000, Дополнение к руководству по обслуживанию

Страница: 249 / 341

6-3 TRANSMIT ADJUSTMENT (continued)
1) Select an adjustment item using cursor or [
↑
] / [
↓
] keys of the PC’s keyboard.
2) Set or modify the adjustment value as specifi ed using [
←
] / [
→
] keys of the PC’s keyboard, then push the [ENTER] key.
ADJUSTMENT
ADJUSTMENT
CONDITION
OPERATION
ADJUSTMENT
ITEM
VALUE
ANALOG
DEVIATION
-Preparation- 1
–
• Set the item [TX Mode] to "1."
[TX Mode] "1"
2
–
1) Connect a Modulation Analyzer to the TX
antenna connector through an attenuator.
2) Set the Modulation Analyzer as;
HPF
: OFF
LPF : 20 kHz
De-emphasis : OFF
Detector : (P-P)/2
– –
3
–
1) Connect an Audio Generator to the MIC
line through the JIG cable.
2) Set the Audio Generator as;
Modulation : 1 kHz
Level : 40 mV rms
Wave form : Sine wave
– –
-Adjust-
(Wide)
4 • CH. : 1-10
• Transmitting
1) Adjust the deviation using [
←
] / [
→
] keys
of the PC’s keyboard.
2) Push the [ENTER] key to store the adjust
value.
[MOD (Wide)] ±4.05–4.15 kHz
(Middle)
<[FR6100] only> 5 • CH. : 1-11
• [Wide Band
Width]
: "Middle"
(see the page 6-4)
• Transmitting
[MOD (Middle)] ±3.15–3.25 kHz
(Narrow) 6 • CH. : 1-12
• Transmitting
[MOD (Narrow)] ±2.05–2.15 kHz
CTCSS/DTCS
DEVIATION
-Preparation- 1
–
• Set the item [TX Mode] to "3."
[TX Mode] "3"
-Adjust- 2 • CH. : 1-19
• Transmitting
1) Adjust the deviation using [
←
] / [
→
] keys
of the PC’s keyboard.
2) Push the [ENTER] key to store the adjust
value.
[CTCSS] ±0.68–0.72 kHz
6-4 RECEIVE ADJUSTMENT
1) Select an adjustment item using cursor or [
↑
] / [
↓
] keys of the PC’s keyboard.
2) Set or modify the adjustment value as specifi ed using [
←
] / [
→
] keys of the PC’s keyboard, then push the [ENTER] key.
ADJUSTMENT
ADJUSTMENT
CONDITION
OPERATION
ADJUSTMENT
ITEM/POINT
VALUE
RECEIVE
SENSITIVITY
-Preparation- 1 – • Set the item [RX Mode] to "1." [RX Mode] "1"
2
–
1) Connect an SSG to the RX antenna
connector.
2) Set the SSG as;
Level : +20 dB
μ
Modulation : 1 kHz
Deviation : 3.5 kHz
– –
-Adjustment-
(Band center) 3 • CH. : 1-23 [Low]
: 1-23 [High]
• Receiving
1) Set the SSG as;
Frequency : 435.000 MHz [Low]
450.100 MHz [High]
375.000 MHz [FR6000-L]
2) Select the item [BPF C ALL] , then push
the [ENTER] key.
[BPF C ALL]
(Automatic
adjustment)
-Adjustment-
(Band center)
For [Low band]
version only 4 • CH. : 1-24
[Low] only
• Receiving
1) Set the SSG as;
Frequency : 400.100 MHz [Low]
350.100 MHz [FR6000-L]
2) Select the item [BPF L ALL] , then push
the [ENTER] key.
[BPF L ALL]
-Adjustment-
(Band high) 5 • CH. : 1-22 [Low]
: 1-24 [High]
• Receiving
1) Set the SSG as;
Frequency : 469.900 MHz [Low]
519.900 MHz [High]
399.900 MHz [FR6000-L]
2) Select the item [BPF H ALL] , then push
the [ENTER] key.
[BPF H ALL]
6 - 9