Icom UHF IC-FR6000, Дополнение к руководству по обслуживанию

Страница: 12 / 341

6-14
• [SQL Level] SETTING
6-7 RECEIVE ADJUSTMENT (continued)
(For [#63], [#64], [#65], [#66], [#67], [#68], [#69], [#75], [#76], and [#77])
1) Select an adjustment item using cursor or [
↑
] / [
↓
] keys of the PC’s keyboard.
2) Set or modify the adjustment value as speci fi ed using [
←
] / [
→
] keys of the PC’s keyboard, and then push the [ENTER] key.
ADJUSTMENT
ADJUSTMENT
CONDITION
OPERATION
ADJUSTMENT
ITEM/POINT
VALUE
S-METER
-Preparation- NOTE: "RECEIVE SENSITIVITY" MUST be adjusted before "S-METER." When "RECEIVE SENSITIVITY" is re-
adjusted, "S-METER" MUST be re-adjusted, too.
1
–
Connect the SSG to the RX antenna connec-
tor, and then set to:
Frequency: 400.100 MHz [L]
450.100 MHz [H]
350.100 MHz [350 MHz]
Modulation: 1 kHz
Deviation: ±3.5 kHz
– –
-Adjust-
(S3 level)
2 • Channel:
1-29 [L]
1-27 [H]
1-28 [350 MHz]
• Receiving
1) Set the SSG to:
Level
†
: +23 dB
μ
(–84 dBm)
2) Select the item
[RSSI S3 Level]
, and then
push the [ENTER] key to store the adjust-
ment value.
[RSSI S3 Level]
(Automatic
adjustment)
(S1 level)
3 • Channel:
1-29 [L]
1-27 [H]
1-28 [350 MHz]
• Receiving
1) Set the SSG to:
Level † : –7 dB
μ
(–114 dBm)
2) Select the item
[RSSI S1 Level]
, and then
push the [ENTER] key, to store the adjust-
ment value.
[RSSI S1 Level]
(Automatic
adjustment)
SQUELCH
-Preparation-
1
–
Set the item
[SQL Level]
to "2" (See the
screen below).
[SQL Level]
"2"
2 Connect the SSG to the RX antenna connec-
tor, and then set the SSG to:
Frequency: 400.100 MHz [L]
450.100 MHz [H]
350.100 MHz [350 MHz]
Modulation: 1 kHz
Deviation: ±3.5 kHz
Level † : –14 dB
μ
(–121 dBm)
– –
-Adjust-
3 • Channel:
1-30 [L]
1-28 [H]
1-29 [350 MHz]
• Receiving
Push
[ENTER]
key to store the value.
[SQL]
To the level where
the squelch just
opens.
[L]= Low band, [H]=High band, [350 MHz]=350 MHz band
†
; The output level of the standard signal generator (SSG) is indicated as the SSG’s open circuit.
August 2016
(Amended page)