manualshive.com logo in svg

Icom UHF IC-F60, Инструкция по эксплуатации

Поделиться
Скачать
Icom UHF IC-F60 Скачать руководство пользователя страница 5

iv

INTRINSIC SAFETY

Versions of the IC-F50 and IC-F60 which dis-

play the “

” marking on the label.

The approval rating for these models are;
Intrinsically safe  :  Class I, II, III, Division 1,  

Groups C, D, E, F, G

Nonincendive  :  Class I, Division 2,  

Groups A, B, C, D

WARNING! NEVER

 charge the BP-227FM (with/with-

out the transceiver) in an explosive atmosphere. The optional 
battery chargers are not approved as Intrinsically Safe.

When the transceiver is used in a hazardous area, the BP-227FM 

MUST

 be attached, either the jack cover or HM-138 

MUST

 be 

attached to the speaker-microphone connector.

KEEP

 the transceiver and the BP-227FM clean to avoid any 

risk of ignition due to the build-up of electrostatic charges.

Repair of Icom radios should only be carried out by authorized 
Icom distributors. In particular, repair of FM approved radios 
can 

ONLY

 be done by Icom to maintain the intrinsically safe 

rating. 

NEVER

 attempt to repair an FM approved radio. Only 

Icom has the repair expertise and procedures to maintain the 
FM approval. Contact your Icom distributor or authorised dealer 
for details.

Содержание UHF IC-F60





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды