6
2
MENU
■
ATA (Automatic Tracking Aid)
A T A MENU
VECT
No.DISP
OFF
ALL
OWN VECT
ALARM
CPA LIMIT
TCPA LIMIT
TRUE
ON
ON
ON
OFF
REL
OFF
OFF
1.0NM
1 MIN
A T A
SEL
D
ATA
• OFF : Turn OFF the ATA function.
• ON : Turn ON the ATA function.
D
No.DISP
• OFF : Do not display any mark number.
• Sel : Display the selected mark number
only.
• ALL : Display all mark numbers.
D
VECT
• TRUE : Select the true vector mode.
• REL : Select the relative vector mode.
D
OWN VECT
• OFF : Do not display your own ship’s vec
-
tor.
• ON : Display your own ship’s vector.
D
ALARM (CPA/TCPA)
• OFF : Turn OFF the alarm function.
• ON : Turn ON the alarm function.
D
CPA* LIMIT
• 0.1 to 10.0NM : Set the CPA
(Closest Point of Ap-
proach) limit with [
t
] [
u
].
D
TCPA* LIMIT
• 1 to 60MIN : Set the TCPA (Time to CPA) limit time
with [
t
] [
u
].
* CPA/TCPA: Closest Point of Approach and Time to Closest
Point of Approach limit is defined by the observer to given
warning when a target or targets are close to within those
limits from your own ship.
■
INT. SETTING
INT. SETTING
BRG INPUT
SPD INPUT
TX INH START
TX INH ANGLE
SAVE TIME
SYMBOL
CHARACTER
BRILL
NMEA
30M
LOG
6M
15M
MANUAL
AUTO
N+1
AUX
GPS
GPS
0
˚
0
˚
KEY ILLUM
MAG VAR
1
2
3
1
2
3
1
2
3
4
7.2
˚
W
1M
D
MAG VAR
• AUTO : Automatically revise magnetic variations.
NOTE:
NMEA data is required.
NEVER
select
“AUTO” without NMEA data; incorrect varia
-
tion data may entered. (p. 38)
• MANUAL : Revise magnetic variation manually.
• Push [
u
] to select [MANUAL], then push [
q
].
Set the revised value with [
t
] [
u
]. Push [
q
]
or [MENU] to exit the menu.
D
BRG INPUT
• NMEA : NMEA0183 bearing data format.
• N+1 : N+1 data format.
• AUX : Other format.
• GPS : Reads NMEA0183 COG format data as
HDG format.
D
SPD INPUT
• GPS : Use the GPS NMEA speed data.
• LOG : Use the speed sensor data.
D
TX INH START
• 0 to 359° : Push [
t
] [
u
] to enter the start point of
the TX inhibit area.
D
TX INH ANGLE
• 0 to 90° : Push [
t
] [
u
] to enter the TX inhibit area.
D
SAVE TIME
• 1M, 6M, 15M or 30M
: Select the standby time during the save
mode.
• The radar for TX interval scan is fixed at 10
revolutions.
D
SYMBOL
• 1/2/3 : Select the symbol brightness.
D
CHARACTER
• 1/2/3 : Select the character brightness.
D
KEY ILLUM
• 1/2/3/4 : Select the key illumination brightness.
