Icom MR-1000R2 Скачать руководство пользователя

Страница: 23 / 47

■

ATA operation

Select the target which you want to track on the dis-
play.

Push [

Ù Ú Ω ≈]

to move the “+” cursor on the de-

sired target.

Push [

TARGET]/

[

] for 1 sec. to select the tar-

get for tracking.

• Dotted square symbol appears on the cursor.
• Target identification number, bearing, distance readout,

course (CSE), speed (SPD), CPA and TCPA appear in
the information screen.

• Timer starts to count the progressing time.
• The vector appears on the target, after the progressing

time of 20 sec. has passed.

• It changes to the circle display of a solid line and a vec-

tor display, and tracking operation is decided, after the
progressing time of one min. has passed.

• When the target which is following disappears, a mark

changes to a lozenge and is blinked. A mark disappears
after one min..

• When a target advances within a setting value, a mark

changes to a triangle, blinks and sounds alarm sound.
Alarm sound will be cancelled if one of key is pushed.

• To cancel the target setting, move the cursor on the tar-

get, then push [

TARGET]/

[

] for 1 sec.

• [

TARGET]/

[

] is pushed for changing the display of

EBL/VRM etc. to target information.

• In order to choose target which displays information,

cursor is united with target and [

TARGET]/

[

] is

pushed.

■

Plotting marks

There are 5 kinds of plotting marks.

: Selected, uncalculated mark.

: Selected, calculated mark.

: Normal, calculated mark.

: CPA/TCPA alarm mark. The target is

close to within a minimum range and

time. Alarm emit indicator. Push [

TAR-

GET]/

[

] to cancel the alarm.

: When the tracking of a target disap-

pears.

■

Course and speed vector

The vector indicates the target’s predicted, true or rel-
ative course and speed.

• Vector time may change depending on the TRAIL TIME set-

ting. (see VIDEO menu, p. 6)

• The tip of the vector shows the target’s predicted position

after a certain time, which has been selected in the “TRAIL
TIME”.

Vector

Current position

Vector time

Target’s predicted
positon

NEW

BRG
CSE

CPA

DIST
SPD
TCPA

No.10

BRG 305.7T

0:20

CSE 081.3T
CPA 5.9NM

DIST 11.43NM
SPD 12.3KT
TCPA 0:50

Identification No.

Bearing

Course

Distance

Speed

Passage of time

Closest Point of
Approach

Time to Closest Point of
Approach

ATA (Automatic Tracking Aid)

MR-1000R2_T2.qxd 04.2.24 10:22 Page 19

Содержание MR-1000R2
















































Результаты поиска

Содержание MR-1000R2

Отзывы:

Похожие инструкции для MR-1000R2

Бренды по названию

Популярные бренды

Icom MR-1000R2, Инструкция по эксплуатации

Результаты поиска

Содержание MR-1000R2

Отзывы:

Похожие инструкции для MR-1000R2

Бренды по названию

Популярные бренды