Icom MA-500TR, Инструкция по эксплуатации

Страница: 19 / 60

11
3
PREPARATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D NMEA Input/Output ports
• NMEA1/NMEA2/NMEA3 data speed
The data communication speed (baud rate) can be set for
each Input/Output port; NMEA1 and NMEA3.
NOTE: The data communication speed of NMEA2 is fixed
to 38400 bps. NMEA2 is u sed for communication between
the transponder and the Icom MarineCommander™ sys-
tem or a GPS receiver.
q
Push
[
∫
] or [
√
] to select “NMEA1” or “NMEA3.”
• NMEA1 : Used for communication between the transponder and
a transceiver or a GPS receiver. (Default: 4800 bps)
• NMEA3 : Used for communication between the transponder and
a navigational equipment or a GPS receiver.
(Default: 4800 bps)
• You cannot select “NMEA2.”
w
Push [ENT] to select the data communication speed be-
tween 4800 bps and 38400 bps into that item.
• You can also select the option by pushing [ Ω ] or [ ≈ ].
e
Repeat steps
q
and
w
to set another port.
r
Push
[CLEAR] to save and return to the Initial setting mode.
[CLEAR]
[ENT]
[ ∫ ], [ √ ],
[ Ω ], [ ≈ ]
• GPS Input1/GPS Input2/GPS Input3
Set the NMEA1, NMEA2 and NMEA3 Input ports’ capability.
q
Push
[
∫
] or [
√
] to select “GPS Input1,” “GPS Input2” or
“GPS Input3.”
• “GPS Input1” is for the NMEA1, “GPS Input2” is for the NMEA2
and “GPS Input3” is for the NMEA3 ports setting.
w
Push
[ENT] to toggle this function ON or OFF.
• You can also turn the function ON by pushing [ ≈ ], or OFF by
pushing [ Ω ].
ON : The GPS information that is received from the ex-
ternal GPS receiver of the selected port is sent to
the transponder.
(Default for “GPS Input2” and “GPS Input3”)
OFF : The GPS information that is received from the ex-
ternal GPS receiver of the selected port is not sent
to the transponder. (Default for “GPS Input1”)
e
Repeat steps
q
and
w
to set other ports’ capability.
r
Push [CLEAR] to save and return to the Initial setting
mode.
[CLEAR]
[ENT]
[ ∫ ], [ √ ],
[ Ω ], [ ≈ ]