Icom iR8600, Справочное руководство

Страница: 4 / 24

Cmd. Sub cmd. Data
Description
00 See p. 9 Output the frequency data for transceive
01 See p. 9 Output the receiving mode for transceive
02 See p. 9 Read the band edge frequencies
03 See p. 9 Read the receiving frequency
04 See p. 9 Read the receiving mode
05 See p. 9 Set the receiving frequency
06 See p. 9 Select the receiving mode
07 Select the VFO mode
08 Select the Memory mode
0000 ~ 0199 Select the Memory channel
( 0000 ~ 0099: Normal Memory
channels/Scan Skip
channels/Scan edges)
(000 0 ~ 0199: Auto Memory Write
channels)
A0 0000 ~ 0102 Select the Memory group
( 0000 ~ 0099: Normal Memory channels
0100: Auto Memory Write channels
0101: Scan Skip channels
0102: Scan edges)
09 Memory write
0A Memory copy to VFO
0B Memory clear
0C Read offset frequency
0D See p. 9 Set offset frequency
0E 00 Scan stop
01 Programmed/memory scan start
02 Programmed scan start
03 ∂ F scan start
04 Auto Memory Write scan start
12 Fine Programmed scan start
13
Fine ∂ F scan start
22 Memory scan start
23 Select memory scan start
24 Mode Select scan start
42 Priority scan start
A0
Set the Fix of ∂ F frequency to OFF
AA
Set the Fix of ∂ F frequency to ON
Ax
Set/read the Fix range (x) of ∂ F frequency
(1=±5kHz, 2=±10kHz, 3=±20kHz,
4=±50kHz, 5=±100kHz, 6=±500kHz,
7=±1MHz)
B0 Set as non-select channel
B1 Set as select channel
( If no selection is performed, the
previously set number by CI-V is set
after turning power ON, otherwise “1” is
automatically set.)
01 ~ 09 Set as select channel
(01=SEL1, 02=SEL2, 03=SEL3,
04=SEL4, 05=SEL5, 06=SEL6,
07=SEL7, 08=SEL8, 09=SEL9)
B2 00 ~ 09 Set starting select memory channel for a
select memory scan
(00=ALL, 01=SEL1, 02=SEL2,
03=SEL3, 04=SEL4, 05=SEL5,
06=SEL6, 07=SEL7, 08=SEL8,
09=SEL9)
D0 Set Scan resume OFF
D1 Set Scan resume ON (Close timer)
D3 Set Scan resume ON (Close & Delay)
0F 10 ~ 12 Read duplex setting
(10=OFF, 11=DUP–, 12=DUP+)
10 Set Simplex
11 Set Duplex –
12 Set
10* 00 Send/read the tuning step OFF(in 10 Hz
steps)
01 Send/read the 100 Hz tuning step
02 Send/read the 1 kHz tuning step
03 Send/read the 2.5 kHz tuning step
04 Send/read the 3.125 kHz tuning step
05 Send/read the 5 kHz tuning step
06 Send/read the 6.25 kHz tuning step
07 Send/read the 8.33 kHz tuning step
08 Send/read the 9 kHz tuning step
09 Send/read the 10 kHz tuning step
10 Send/read the 12.5 kHz tuning step
11 Send/read the 20 kHz tuning step
Cmd. Sub cmd. Data
Description
10* 12 Send/read the 25 kHz tuning step
13 Send/read the 100 kHz tuning step
14 Send/read the programmable tuning step
11* 00 Send/read Attenuator OFF (0 dB)
10 Send/read Attenuator (10 dB)
20 Send/read Attenuator (20 dB)
30 Send/read Attenuator (30 dB)
12* 00 ~ 02 Select antenna (only 10 kHz –
29.999999 MHz)
(00=ANT1, 01=ANT2, 02=ANT3)
13 00 Speech all parameters
( Signal level + Fre Receiving
mode)
01 Speech frequency
(Signal level + Frequency)
02 Speech receiving mode
L
The mode is announced after the
ongoing speech.
14* 01 0000 ~ 0255 Send/read the AF gain level
(0000=Minimum ~ 0255=Maximum)
02 0000 ~ 0255 Send/read the RF gain level
(0000=Minimum ~ 0255=Maximum)
03 0000 ~ 0255 Send/read the squelch level
(0000=Minimum ~ 0255=Maximum)
06 0000 ~ 0255 Send/read the NR level
(0000=0% ~ 0255=100%)
07 0000 ~ 0255 Send/read the PBT1 position
(0000=Narrow the upper edge,
0128=Center position,
0255=Narrow the lower edge)
08 0000 ~ 0255 Send/read the PBT2 position
(0000=Narrow the upper edge,
0128=Center position,
0255=Narrow the lower edge)
09 0000 ~ 0255 Send/read CW pitch
(0000=300 Hz, 0128=600 Hz,
0255=900 Hz) (in 5 Hz steps)
0D 0000 ~ 0255 Send/read the NOTCH position
(0000=A lower position,
0128=Center position,
0255=A upper position)
12 0000 ~ 0255 Send/read the NB level
(0000=0% ~ 0255=100%)
19 0000 ~ 0255 Send/read the LCD brightness
(0000=0% ~ 0255=100%)
1B 0000 ~ 0255 Send/read the tone (Bass) level
(0000=–15, 0128=0, 0255=+15)
1C 0000 ~ 0255 Send/read the tone (Treble) level
(0000=–15, 0128=0, 0255=+15)
1D 0000 ~ 0255 Send/read the Scan Speed
(0000=1, 0128=16, 0255=30)
1E 0000 ~ 0255 Send/read the Scan Delay
(0000=1s, 0128=16s, 0255=30s)
1F 0000 ~ 0255 Send/read the PRIO Interval
(0000=1s, 0128=8s, 0255=15s)
15 01 00/01 Read noise or S-meter squelch status
(00=Close, 01=Open)
02 0000 ~ 0255 Read the S-meter level
(0000=S0, 0120=S9, 0241=S9+60dB)
03 Read the meter level in the
"AAAABBCC" Format:
AAAA= Absolute signal strength (in
0.1 steps)
BB= Plus or minus sign (0/1=+/–)
CC= Meter type (0/1/2=dBμ/dBμEMF/
dBm)
04 0000 ~ 0255 Read the center meter level
( 0000= Left edge, 0128= Center,
0255= Right edge)
05 00/01 Read various squelch function’s
(including the tone squelch) status
(00=Close, 01=Open)
17 00/01 Read the S-AM SYNC Indicator
( 00=Non-synchronous,
01=Synchronous)
18 00/01 Read the OVF indicator status
(00=OFF, 01=ON)
16* 02 00/01 Send/read the Preamp status
(00=OFF, 01=ON)
12 01 ~ 03 Send/read the AGC function status
( 01=FAST, 02=MID, 03=SLOW)
D
Command table
Remote control
3