Icom iR8600, Справочное руководство

Страница: 19 / 24


Digital code squelch setting
Command:
20 0501, 20 0502
q
X X
1 digit: 0 ~ 9
10 digit: 0 ~ 9

P25 RX ID
Command: 20 0601, 20 0602
q
,
w e
~
i
o
~
!4
0 X 0 X 0 X X X X X 0 X 0 X 0 X
0 X 0 X 0 X 0 X 0 X 0 X 0 X 0 X 0 X
!5
~
!7
0 (Fixed)
0 (Fixed)
q
Header flag data (First byte)
Data Description
bit7 0 (Fixed) —
bit6 0 (Reserved)
bit5 0 (Reserved)
bit4 0 (Reserved)
bit3
See the table below Type of call
bit2
bit1 0/1 0=Encryption OFF, 1=Encryption ON
bit0 0/1 0=Normal,1=EMR
Data
Description
bit3 bit2
1 1 All call
1 0 Group call
0 1 Individual call
0 0 Not identified
w
Header flag data (Second byte)
Data Description
bit7 0 (Fixed) —
bit6 0 (Reserved)
bit5 0 (Reserved)
bit4 0 (Reserved)
bit3 0 (Reserved)
bit2 0 (Reserved)
bit1 0 (Reserved)
bit0 0 (Reserved)
e
~
i
: ID of the CALLER station (6 digits in Hexer decimal)
o
~
!4
: ID of the CALLED station (6 digits in Hexer decimal)
!5
~
!7
: NAC (3 digits in Hexer decimal)
L
If the NAC, CALLER or CALLED station is not identified,
"FF" is returned.
L
FF: No signal has been received since the power was
turned ON.

P25 RX status data
Command:
20 0701, 20 0702
Data Function Description
bit7 0 (Fixed) —
bit6 0/1 — (Reserved)
bit5 0/1 Receive
status
While receiving a P25 signal, "1" is
returned. (Regardless of NAC)
bit4 0/1 Last call
finisher
When the last call was finished by a
user, “1” is returned.
bit3 0/1 Receiving a
signal
When the audio tone can be heard, “1”
is returned.
bit2 0/1 Emergency
call
While receiving an emergency call, "1"
is returned.
bit1 0/1 Interfere
detection
While under an interference (Mode icon P25
and FM alternately blink), "1" is returned.
bit0 0/1 Encryption When the call is encrypted , "1" is
returned.

dPMR RX ID
Command: 20 0801, 20 0802
u
~
!0 q
,
w !1
,
!2 e
~
y
• • • • • •
0 X 0 X X X X X X X 0 X X X X X
0 (Fixed)
q
Header flag data (First byte)
Data Description
bit7 0 (Fixed) —
bit6 0 (Reserved)
bit5
0 (Reserved)
bit4
0/1 0=dPMR446, 1=Tier2
bit3
See the table below Type of call
bit2
bit1 0/1 0=Scramble OFF, 1=Scramble ON
bit0 0 (Reserved)
Data
Description
bit3 bit2
1 1 All call
1 0 (Not used)
0 1 Individual or Group call
0 0 Not identified
w
Header flag data (Second byte)
Data Description
bit7 0 (Fixed) —
bit6
0 (Reserved)
bit5
0 (Reserved)
bit4 0 (Reserved)
bit3 0 (Reserved)
bit2 0 (Reserved)
bit1 0 (Reserved)
bit0 0 (Reserved)
e
~
y
: ID of the CALLER station (7 digits in decimal)
u
~
!0
: ID of the CALLED station (7 digits in decimal*)
!1
~
!2
: CC/COM ID (2 or 3 digits in decimal)
* If a wildcard is contained, corresponding digit is filled with "A."
L
If the CC/COM ID, CALLER or CALLED station is not
identified, "FF" is returned.
L
FF: No signal has been received since the power was
turned ON.
D
Command formats (Continued)
Remote control
18