Icom iM506, Инструкция по эксплуатации

Страница: 82 / 124

73
7
DSC OPERATION
New2001
After making the individual DSC call, the transponder will
r
display “DSC Transmission COMPLETED.”
• Push [CLEAR] to return to the screen displayed before you en -
tered the voice channel selection screen in step
w
.
• The transceiver stands by on Channel 70 until an acknowledge -
ment is received.
Transponder’s display Transceiver’s display
Step 2: Transceiver’s operation
When the acknowledgement is received, alarm sounds.
t
If the acknowledgement
➥
‘Able to comply
’
is received,
push [ALARM OFF] to stop the alarm, and then select
the intership channel specified in step
w
.
• A different intership channel will be selected if the station you
called cannot use the channel.
• To reply, push [PTT] and speak at a normal voice level.
• You can check the MMSI code or the name, if programmed,
of the AIS target on the display.
If the acknowledgement
➥
‘Unable to comply
’
is received,
push [ALARM OFF] to stop the alarm, and then return
to the operating channel before you entered the MENU
screen.
y
After the communication is finished, push [EXIT] to return
to the normal operating mode.
[DSC]
[CLEAR]
[
Z
]
[
Y
]
TRANSPONDER
‘Able to comply’ is received
‘Unable to comply’ is received