32
5
BATTERY CASE
■
Optional battery case (BP-226)
When using the optional battery case attached to the transceiver,
install 5
×
AA (LR6) size alkaline batteries as illustrated at right. The
BP-226 is constructed to the IPX4 waterproof standard (IEC 60529,
2006).
q
Hook your
fi
nger under the latch, and open the cover in the direc-
tion of the arrow (
q
). (Fig.1)
w
Install 5
×
AA (LR6) size alkaline batteries. (Fig.2)
•
Install the alkaline batteries only.
•
Be sure to observe the correct polarity.
•
Do not pin the ribbon under the batteries.
e
Close the cover by
fi
tting in the direction of the arrow (
w
)
fi
rst,
then check that the latch is in place (
e
). (Fig.1)
•
Be sure the gasket and the ribbon are seated correctly, and do not
protrude from the battery case. (Fig.3)
CAUTION:
•
When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old batter-
ies together.
•
Keep battery contacts clean. It
’
s a good idea to clean battery
terminals once a week.
•
Never incinerate used battery cells since internal battery gas
may cause them to rupture.
•
Never expose a detached battery case to water. If the battery
case gets wet, be sure to wipe it dry before using it.
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 32 (1,1)
