10
2
PANEL DESCRIPTION
MONITOR KEY
➥
Mute and release the CTCSS (DTCS) or 2-tone squelch mute.
Open any squelch/deactivate any mute while pushing and hold-
ing this key. (LMR operation only)
➥
Activates one of (or two of) the following functions on each chan-
nel independently: (PMR operation only)
•
Push and hold to un-mute the channel (audio is emitted;
‘
Audible
’
condition).
•
Push to mute the channel (sets to
‘
Inaudible
’
only).
•
Push after the communication is finished to send a
‘
reset code
’
.
(BIIS operation only)
NOTE:
The un-mute condition (
‘
Audible
’
condition) may auto-
matically return to the mute condition (
‘
Inaudible
‘
condition)
after a speci
fi
ed period.
LIGHT KEY
Push to turn the backlight ON for about 5 sec. even if the backlight
function is turned OFF in user set mode.
LONE WORKER KEY
Push to turn the Lone Worker function ON or OFF.
•
If the Lone Worker function is activated, the Emergency function is au-
tomatically turned ON after the speci
fi
ed time period has passed with
no operation is performed.
HIGH/LOW KEY
Push to select the transmit output power temporarily or perma-
nently, depending on the pre-setting.
•
Ask your dealer for the output power level for each selection.
C.TONE CHANNEL ENTER KEY
Push to enter the continuous tone channel selection mode, and push
[CH Up]/[CH Down] to change the tone frequency/code setting. The
selected channel remains set as the continuous tone channel until
another channel is designated as such.
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 10 (1,1)