4
BIIS OPERATION
D
Group call
q
When a group call is received;
• Beeps sound.
• “ ” appears and the mute is released.
• The programmed text message (e.g.“
”) and the calling sta-
tion ID (or text) is displayed alternately, depending on the setting.
• “
” appears or blinks depending on the setting.
Appears or blinks
Appears
w
Push and hold [PTT], then speak into the microphone at
a normal voice level.
NOTE: Only one station is permitted to speak.
• “ ” appears.
e
Release [PTT] to return to receive.
• “ ” appears while receiving a signal.
r
To finish the conversation, push [MONITOR] (Moni(Audi))
to send the ‘Clear down’ signal.
• Either station can send a ‘Clear down’ signal.
• “
” is displayed for 2 sec. (approx.)
• “ ” disappears and the transceiver returns to the standby condition.
D
Displaying the received call record
— Queue indication
The transceiver memorizes the calling station ID in the
memory. Up to 3 calls can be memorized, and the oldest call
record is erased when a 4th call is received. However, once
the transceiver is powered OFF, the all records are cleared.
q
Push and hold [P1] (Digital) for 1 sec.
• Displays following indication.
When a record is available
When no record is available
w
Push [UP] or [DOWN] to select the desired call.
e
Push and hold [P1] (Digital) for 1 sec. again to return to
the standby condition.
• When no operation is performed for 30 sec., the transceiver re-
turns to the standby condition automatically.
17
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16