12
3
BASIC OPERATION
■
Channel selection
Several types of channel selections are available. Methods
may differ according to your system set up.
NON-BANK TYPE:
To select the desired operating channel:
• Push [CH Up] or [CH Down].
• Rotate [ROTARY SELECTOR]*.
- Up to pre-programmed 16 channels can be selected.
• Push one of [MR-CH 1] to [MR-CH 4].
BANK TYPE:
To select the desired bank:
• Push [Bank], then push [CH Up] or [CH Down].
• Rotate [ROTARY SELECTOR]*.
- Up to pre-programmed 16 banks can be selected.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning
power ON, the transceiver automatically starts scanning.
Scanning stops when receiving a call.
* Depending on the pre-setting.
When the [Rotary selector] activates as the “Operating channel”
selection, [CH Up]/[CH Down] are not available for the channel se-
lection.
When the [Rotary selector] activates as the “Operating bank” se-
lection, [Bank] is not available for the bank selection.
■
Call procedure
When your system employs tone signaling (excluding CTCSS
and DTCS), the call procedure may be necessary prior to voice
transmission. The tone signalling employed may be a selective
calling system which allows you to call specific station(s) only
and prevent unwanted stations from contacting you.
q
Select the desired TX code channel or 2/5-tone code ac-
cording to your System Operator’s instructions.
• This may not be necessary depending on programming.
• Refer to page 14 or 15 for selection.
w
Push [Call] (assigned to one of the dealer programma-
ble keys: [UP], [DOWN], [P0], [P1], [P2], [P3], [RED] and
[Monitor]) or [PTT].
e
After transmitting a 2/5-tone code, the remainder of your
communication can be carried out in the normal fashion.
Selective calling
Non-selective calling
